Pulp Disintegrator For standardized disintegration of pulp
to a homogeneous suspension. Pivoted drive unit with stainless
steel propeller and shaft. The propeller is driven by electric
motor via stepped timing belt, which ensures a direct drive
without slippage.
Rapid Sheet Dryer For
shortening the drying time of wet pulp or paper samples before
determining the dry weight or moisture content. Provided with Flat
heating Elements. Stainless steel sheet fabrications with
insulating material ensure long service life.
Sheet Drying Cylinder For
drying the lab pulp hand sheets or paper samples as per commercial
production in laboratory. The process helps to prevent wrinkling
and shrinkage in the dried samples. It also permits convenient and
rapid insertion of the sheets.
Sheet Drying Cabinet For
faster drying and conditioning the hand sheet after pressing. The
hot air passes through the
holes in the drying ring to dry and without effecting the surface
of the hand sheets. The Design is
accordance as per the Technical Section of British Paper & Board
Industry.
Lab Chipper For
preparation of chips from wood, bamboo and other similar material
for lab and educational purposes. Input tube diameter 80 mm set at
and angle of about 500. Capacity max 500 kg/h chips. Chipping disc
350 mm diameter, speed 700 rpm.
Wood Chip Classifier For rapid, reproducible and accurate
classification of wood chips in respect to size and
thickness by using standard size screening trays mounted on a
shaking mechanism with
specified frequency.
