Lab Mechanical Crusher For preparation of wood meal of wood
samples for chemical analysis and grinding virtually any material
to produce a finely meshed sample.
Four blade rotor dia 200mm operating at 400 to 800 rpm.
Interchangeable screen mesh available as per requirement.
Rotary Digester For
producing pulp from various fibrous material under specified and
control condition under pressure, temperature and time. Maximum
pressure 15 kg/cm2. Electric heating provided with by thermostatic
temperature control.
Research Digester The
Digester is a complete pulping unit for producing pulps by cooking
wood chips in a manner
similar to a commercial digester. The unit is easy to operate and
features precise control of pulping variables to ensure good
repeatability of results.
Pulping Unit (Bomb Digester) For
faster drying and conditioning the hand sheet after pressing. The
hot air passes through the
holes in the drying ring to dry and without effecting the surface
of the hand sheets. The Design is
accordance as per the Technical Section of British Paper & Board
Industry.
Pulping Unit For
laboratory production of chemical pulp. Provided with six
autoclaves, pressure tested, each of 2.5
liter suitable for 300/350 gm bone-dry wood rotate in forced hot
air with precise temperature control to
monitor cooking behave of different raw materials.
Lab Valley Beater For laboratory beating of pulp under
standardized conditions. to determine the behavior of pulp when
subject to definite beating schedule. This beater is suitable for
routine checking of pulp in laboratory. Net volume 25 liters of
680 g bone-dry pulp at 2-2.5% concentration.
